Artesian Spas Antigua Bedienungshandbuch PDF herunterladen (Seite 30)

55 56

MAINTAINING YOUR SPA

DRAINING YOUR SPA

Your spa needs to be drained, cleaned, waxed, and reﬁ lled about

every six months. More frequent water changes may be necessary if

bather load is heavy. A hose bib has been provided below the left side

of your front access panel, to assist you in draining your spa.

1) Turn off the power to your spa. If

you fail to turn the power off, vital

components could be damaged. Do

not leave an empty spa exposed for

long periods of time in hot, sunny

weather.

2) Attach your garden hose to the hose

bib.

3) Place the other end of the hose in

an area that will accept the water

capacity of your spa.

4) Open the hose bib by turning the valve knob counter-

clockwise to the full stop position.

5) Check the garden hose end to see if water is ﬂ owing. If water

is not ﬂ owing, check the hose for kinks. Also check to see if

valve is in the full open position.

CAUTION: The chemical content and temperature of the water will

cause damage to certain vegetation. We do not recommend that

you drain your spa onto plants or lawns. If you choose to do this,

please remove your spa cover and allow spa to cool for a mini-

mum of 24 hours with the spa turned off.

PILLOW CARE

Remove and clean the pillows with soapy water and a soft cloth when

needed. Use a vinyl conditioner once a month. Remove pillows when

doing chemical shock treatment.

Valve Knob

Hose Bib

JET CARE

We recommended that you clean your jets when you drain your spa.

However, if you do need to clean your jets in between this can be

accomplished with a full spa.

1) To remove the jet inserts turn

the jet counterclockwise to the

off position until it stops.

Continue to turn the jet past the

stop point to loosen it from the

spa. The insert will now pull out.

2) Soak jet inserts in a mixture of

1 part vinegar to two parts warm

water for 2-3 hours. Periodically

rotate the spinner nozzle to

break up residue in the jets.

4) Rinse the jet inserts under warm

water.

5) To reinstall the jets insert jet into

jet body and turn clockwise until

fully seated then tug to make

sure it is seated properly. You

can then continue to turn clock-

wise until it stops.

NOTE: A jet with stainless steel escutcheons can be slippery. You

can use a soft cloth or jar-opening pad to assist in removing and

installing the jet.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

Artesian Spas Antigua Bedienungshandbuch Seite 30

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Oberirdisches Schwimmbadzubehör Artesian Spas Antigua