Artesian Spas Antigua Bedienungshandbuch PDF herunterladen (Seite 28)

KEYS AND FUNCTION cont...

LIGHT KEY

Pressing the LIGHT Key once will turn the light on full intensity. The

Light Icon is displayed. Pressing the LIGHT Key a second time will turn

the light off.

NOTE: A built in timer automatically turns the light off after 2

hours unless light has been manually deactivated.

UP KEY

The UP Key displays and increases the spa temperature set point. The

ﬁrst push of the UP Key will display the current temperature set point in

the display. Each additional push of the UP Key will increase the spa

temperature set point by 1 degree Fahrenheit. Holding the key

increases the set point automatically by 1 degree Fahrenheit. The

temperature limit is 104 degrees Fahrenheit (40 degrees Celcius).

The default tempurature is 95 degrees Fahrenheit ( 35 degrees

Celcius).

The set point icon is on when UP key is pressed and for 5 seconds

after key has been released.

DOWN KEY

The DOWN Key displays and decreases the spa temperature set

point. The ﬁrst push of the DOWN Key will display the current

temperature set point in the display. Each additional push of the

DOWN Key will decrease the spa temperature set point by 1 degree

Fahrenheit. Holding the key decreases the set point automatically by 1

degree Fahrenheit. The temperature limit is 59 degrees Fahrenheit (15

degrees Celcius).

The default temperature is 95 degrees Fahrenheit ( 35 degrees

Celcius).

The set point icon is on when DOWN key is pressed and for 5 seconds

after key has been released.

ECONOMY KEY

Press the ECONOMY key to turn economy mode on. Press the

ECONOMY key a second time to turn economy mode off. When the

spa is set to economy mode the icon is on solid.

When economy mode is set, the pack regulates the water temperature

20 degrees below the actual set point.

FILTER KEY

The ﬁrst push of the FILTER key will show ‘Fdxx’ in the display with ‘xx’

being the ﬁlter duration time in hours. You can then use the UP and

DOWN keys to set the duration time from 0 to 12 hours.

A second press of the FILTER key will save and exit. The ﬁlter cycle

will start right away. If the FILTER key is not pressed a second time

within 5 seconds the new ( if it was changed) duration is saved, but the

cycle will start only at the next scheduled ﬁlter cycle.

The default duration is 2 hours without the circulation pump and 12

hours with the circulation pump.

The ﬁlter icon is lit only when the ﬁlter cycle is on.

FILTER CYCLE

Functionality Without Circulation Pump - The ﬁlter cycle occurs

twice a day (every 12 hours), it is adjustable from 0 to 12 hours and

consists of starting Pump 2 and Blower/Pump 3 for 1 minute to purge

the plumbing and then start Pump 1 low speed and the ozonator for

the duration of the cycle.

Functionality With Circulation Pump - The ﬁlter cycle occurs twice

a day (every 12 hours), it is adjustable from 0 to 12 hours and consists

of starting Pump 2 and Blower/Pump 3 for 1 minute to purge the

plumbing and then start the ozonator and the circulation pump for the

duration of the cycle.

Overtemp Protection - If the water temperature exceeds the set point

by more than 2 degrees F when the temperature of the water is 98

Degrees F or above, the system will suspend the ﬁlter cycle. This -

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

Artesian Spas Antigua Bedienungshandbuch Seite 28

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Oberirdisches Schwimmbadzubehör Artesian Spas Antigua